The Aurora F-3 Project is a Xcel Energy rebate program that pays 100% of the cost of qualifying upgrades, up to a set cap for each measure, for homes inside one specific natural gas service area in west Aurora. Cold climate heat pumps can earn up to $15,000, heat pump water heaters up to $3,500, a high efficiency furnace upgrade up to $3,000, and insulation and air sealing up to $7,350 combined. These are some of the largest residential rebates available anywhere in Colorado right now, but only for addresses inside the Aurora F-3 Project boundary.
Free Aurora F-3 Eligibility Check. Not sure if your home is inside the boundary? The Comfort Crew will check your address against Xcel’s project map, list every rebate your home qualifies for, and give you a $0 estimate with the rebates already shown. See current HVAC offers or request your eligibility check.
The Comfort Crew Heating and Cooling installs heat pumps, high efficiency furnaces, and complete heating and cooling systems for homeowners across Aurora, Denver, and the greater metro area. As a contractor in Xcel Energy’s trade partner network, we can design your system, handle the installation, and file your F-3 rebate application for you. This page explains what the program pays, who qualifies, the rules that decide how much you actually receive, and how the process works from your first call to your final rebate.
Natural gas use in this part of west Aurora has been growing, and the local gas system is getting close to its capacity on the coldest days of the year. The traditional fix would be to build more gas pipeline. Instead, Xcel Energy is paying homeowners inside the area to reduce how much gas they use during periods of high demand. Utilities call this approach a non-pipeline alternative, and the math is simple: if enough homes heat more efficiently or switch to electric heat pumps, the new pipe may never need to be built.
That is why this program pays so much more than standard utility rebates. Every qualifying measure is covered at 100% of the project cost, up to the cap for that measure. For many homeowners, that means a new cold climate heat pump, a heat pump water heater, or a full insulation package costs little or nothing out of pocket.
You can read Xcel’s own description of the program on the Xcel Energy Aurora F-3 Project page, which also links to the official project area map and rebate summary.








An HVAC system is not a collection of independent parts. Everything is connected, and when one component is struggling the rest of the system has to compensate. That compensation is where the real cost accumulates.
Here is how it plays out in the three most common scenarios.
Dirty coils lead to compressor damage. When condenser coils are clogged with dirt, dust, or cottonwood, the system cannot release heat efficiently. The compressor has to work longer and run hotter to do the same job. Over time that extra strain wears down the compressor. Compressor replacement is one of the most expensive hvac repair costs a homeowner can face, often running $1,500 to $3,000 or more depending on the system.
Dirty filters restrict airflow and freeze coils. A clogged filter chokes off the airflow the system needs to function correctly. That leads to a frozen evaporator coil, reduced efficiency, blower motor stress, uneven temperatures throughout the house, and rising energy bills. What started as a $5 filter replacement becomes a diagnostic visit, a coil thaw, and sometimes a blower repair.
Weak capacitors fail at the worst time. Capacitors degrade gradually. The system may show subtle startup symptoms for months before the capacitor finally gives out. That usually happens during the first serious heat wave of the summer, when schedules are backed up and emergency ac repair calls are stacking up across the metro. A capacitor replacement caught during a spring tune-up costs a fraction of what an emergency ac repair call runs in July.
Cold climate heat pump, ductless (mini split)
16 SEER2, 9 EER2, 9.5 HSPF2, cold climate performance at 5°F
$15,000
Cold climate heat pump, ducted
15.2 SEER2, 10 EER2, 8.1 HSPF2, cold climate performance at 5°F
$15,000
Cold climate heat pump, mixed ducted and ductless
15.2 SEER2, 10 EER2, 8.1 HSPF2, cold climate performance at 5°F
$15,000
Ground source heat pump (closed loop)
16 EER2, 3.3 COP at full load
$15,000
Gas furnace replacing a non-condensing furnace
95% AFUE or higher
$3,000
Heat pump water heater
ENERGY STAR certified
$3,500
Air sealing
20% reduction in CFM50
$1,200
Wall insulation
Empty cavity before, R-13 or greater after
$3,600
Attic insulation
Below R-24 before, R-60 or greater after
$2,550
The dollar amounts get the attention, but the equipment standard is what decides whether a heat pump qualifies. For F-3 rebates, an air source heat pump must keep working efficiently when it is 5°F outside. In plain terms, that means two things:
Not every heat pump on the market meets both tests, and choosing the wrong model can cost you the rebate entirely. We only quote equipment that is listed as meeting the program standard, and we size it with a room by room load calculation so it can carry your home through a real Front Range winter. The Department of Energy guide to heat pump systems is a helpful primer if you want to understand how modern cold climate equipment works. For a broader look at whether a heat pump fits your home, see our article on whether heat pumps are a good option in the Denver metro.
Not every homeowner is ready to go fully electric, and the program accounts for that. If your home has an older non-condensing furnace, typically an 80% model or lower, replacing it with a furnace rated at 95% AFUE or higher qualifies for up to $3,000. That option lowers your gas use during peak demand while keeping gas heat. Our furnace replacement team can price both paths side by side so you can see the real out-of-pocket difference.
Water heating is the second largest gas load in most homes, which is why a heat pump water heater qualifies for up to $3,500. Insulation and air sealing reduce how much heat your home needs in the first place, so they make every other upgrade work better. Many older homes inside the boundary have empty wall cavities and thin attic insulation, and the program covers up to $7,350 combined for those improvements. We will tell you during your evaluation whether your home is a good candidate.
Eligibility comes down to three requirements:
The program does not list income limits, so households at any income level inside the boundary can participate.
The project area is a single gas service loop in west Aurora. It includes the Lowry area, the neighborhoods around the Community College of Aurora, and blocks south and east of the Anschutz Medical Campus. The boundary runs along major roads that include East Montview Boulevard, Lansing Street, East Colfax Avenue, North Sable Boulevard, Interstate 225, East Mississippi Avenue, South Dayton Street, East Alameda Avenue, Monaco Street Parkway, and East 8th Avenue.
Because the boundary is drawn around Xcel’s gas system rather than municipal lines, a few homes with a Denver mailing address near Lowry may fall inside it, while some Aurora addresses just outside it do not. The street list above is only a guide. The official source is the project area map linked from the Xcel Energy Aurora F-3 Project page, and we check every address against that map before we quote.
The rebate caps are generous, but a few program rules determine your final number. Understanding them up front avoids surprises.
Total rebates cannot exceed your actual cost. Rebates from every source combined, including state, local, and nonprofit programs, cannot add up to more than the actual equipment and labor cost of the project. Because F-3 already covers 100% up to the cap, other incentives mostly reduce whatever balance is left above the cap rather than stacking on top.
Heat pump rebates require full removal of the gas equipment being replaced. For heat pump and heat pump water heater measures, both the homeowner and the contractor must certify that the gas equipment serving that space was fully removed. Keeping your old furnace as cold weather backup disqualifies the heat pump measure under this program. If you prefer a dual fuel setup with a furnace as backup, standard Xcel rebates may still apply, but the F-3 rebate will not.
One rebate per 12 months for equipment doing the same job. You cannot claim a second rebate for the same type of equipment within a year.
No double dipping across Xcel programs. The same improvement cannot receive a rebate under F-3 and another Xcel program.
Invoices must be dated on or after June 22, 2026. Work invoiced before the current rebate summary took effect does not qualify.
Funding is limited and first come, first served. There is no published end date, but the program closes when its funding runs out. Xcel recommends confirming the program is still active and funded before you complete a project, and we verify that for every F-3 job before installation day.
A trade partner contractor is required. The work must be completed by a contractor in Xcel Energy’s trade partner network, and that contractor submits the rebate application.
Colorado’s state heat pump tax credit is delivered as a discount on your invoice through registered contractors, and the Colorado Energy Office publishes the current amounts. Under the cost cap rule, that discount and any other incentive count toward the total, so inside the F-3 area they mainly help when your project cost is higher than the F-3 cap. Our heat pump rebates page and rebate calculator cover the standard programs available to homes outside the boundary.
Send us your address and we will confirm whether you are inside the Aurora F-3 Project boundary, list every measure your home qualifies for, and show you the rebates on your quote before you commit to anything.
We handle the paperwork so you can focus on choosing the right system.
If the cost of your project goes beyond the rebate cap, 0% HVAC financing is available for qualified homeowners to cover the remaining balance.
The best F-3 upgrade plan depends on your home, your current equipment, and how far you want to go.
Full electric heating with a cold climate heat pump. This is the largest rebate in the program and the biggest reduction in gas use. A ducted system works well for homes with existing ductwork in good shape, while ductless mini splits are a strong fit for homes without ducts or with rooms that never heat evenly. Learn more about our heat pump installation and heat pump replacement services.
A high efficiency furnace upgrade. If you want to keep gas heat, replacing a non-condensing furnace with a 95% AFUE or higher model earns up to $3,000 and still lowers peak gas use. Our furnace installation page explains what a properly done install includes.
Whole home efficiency. Pairing a heat pump with a heat pump water heater, insulation, and air sealing captures the most rebate dollars and gives you the most comfortable, efficient home. Weatherization first also means your heat pump can be sized smaller, which lowers its cost.
If you are still weighing gas versus electric, our comparison of AC versus heat pump options walks through the tradeoffs, and ENERGY STAR’s heating and cooling guidance offers additional background on efficient equipment.
Homes outside the boundary still have access to Xcel Energy’s standard statewide heat pump rebates, which are paid per heating ton and depend on the equipment and the home’s existing heating fuel. Those rebates are valuable, but they are a fraction of what F-3 pays. If your address is outside the project area, we will quote your system with every standard incentive you qualify for instead.
Once your new system is installed, a maintenance membership keeps it running at the efficiency you paid for, and our heat pump service team is available if anything ever needs attention.
The Comfort Crew Heating and Cooling serves homeowners inside the Aurora F-3 Project area and throughout the Denver metro, including:
Aurora Denver Centennial Englewood Commerce City Thornton Westminster Northglenn Broomfield Brighton
Do not see your city listed? Visit our full areas we serve page or contact us to ask about service in your area.
Who qualifies for Aurora F-3 Project rebates? Homeowners with active Xcel Energy residential natural gas service at an address inside the project boundary. Gas only and gas plus electric customers both qualify. New construction and previously unheated space do not.
How much does the Aurora F-3 Project pay? Each measure pays 100% of project cost up to a cap: $15,000 for a cold climate or ground source heat pump, $3,500 for a heat pump water heater, $3,000 for a 95% AFUE furnace replacing a non-condensing furnace, and $7,350 combined for attic insulation, wall insulation, and air sealing.
Is there a deadline for the Aurora F-3 Project? Invoices must be dated on or after June 22, 2026. There is no published end date, but funding is limited and first come, first served, so the program ends when the money runs out.
Do I have to remove my furnace to get the heat pump rebate? Yes. For heat pump measures, the gas equipment serving that space must be fully removed and certified by both you and your contractor. Keeping a furnace as backup disqualifies the heat pump rebate under this program, although standard Xcel rebates may still apply.
Can I keep gas heat and still use the program? Yes. Replacing a non-condensing furnace with a 95% AFUE or higher furnace qualifies for up to $3,000 without switching to electric heat.
How do I know if my address is inside the boundary? Check Xcel’s official Aurora F-3 project area map, or send us your address and we will check it for you. Eligibility follows the gas system boundary, not city limits.
Do I need to use a specific contractor? Yes. The work must be completed by a contractor in Xcel Energy’s trade partner network, who also files the rebate application.
How long does it take to get the rebate? Xcel typically reviews and processes F-3 applications within six to eight weeks. Approved rebates are paid by check or applied directly to the contractor invoice.
Can I combine F-3 with other rebates? Other incentives can apply, but total rebates from all sources cannot exceed your actual project cost. The same improvement also cannot receive a rebate from another Xcel program.
The Aurora F-3 Project is one of the best opportunities Colorado homeowners have ever had to upgrade their heating, water heating, and insulation at little or no cost, but funding is limited. The Comfort Crew will confirm your eligibility, design a system that meets the program standards, install it the right way, and file your rebate application for you.
Contact The Comfort Crew today to schedule your free Aurora F-3 eligibility check and $0 estimate.